====== W-LAN Access Points und W-LAN Router ======
===== Verwendete Geräte =====
  * [[TL-WR1043ND|TP-Link TL-WR1043ND]] - alte Serie, 5x Gigabit, 2.4GHz und 1x USB
  * [[TL-WDR4300|TP-Link TL-WDR4300]] - neue Serie, 5x Gigabit, 2.4 & 5GHz und 2x USB

===== Auflistung =====
^ Kurzname      ^ Ort       ^ Typ       ^ IP-Adresse          ^ Besonderheiten ^ Kanal          ^ Gäste-Wlan   ^
| Aktor-Saal | 2. OG Dachstuhl | [[TL-MR3020|TP-Link TL-MR3020]] | 192.168.0.86 | [[http://192.168.0.86/relay.php|Relais]], [[http://192.168.0.86/cgi-bin/luci|LuCI]] | (auto) | nein |
| Aktor-Stadl | Verteiler Stadl-Ost | [[TL-MR3020|TP-Link TL-MR3020]] | 192.168.0.87 | [[http://192.168.0.87/relay.php|Relais]], [[http://192.168.0.87/cgi-bin/luci|LuCI]] | (auto) | nein |
| hdmi-bar | Bar, Lüftungsverteiler | [[TL-MR3020|TP-Link TL-MR3020]] | 192.168.0.96 | [[digitalsignage|Steuerung HDMI Matrix Switch]]\\ kein Web-Interface | (auto) | nein |
| Freinersteig\\ demo7 | Dachboden bei Oma | [[TL-MR3020|TP-Link TL-MR3020]] | 192.168.0.88 | kein Web-Interface, W-LAN Client\\ Kamera-Steuerung | (auto) | nein |
| demo15 | Event Kamera | [[TL-MR3020|TP-Link TL-MR3020]] | 192.168.0.95 | kein Web-Interface, W-LAN Client\\ Kamera-Steuerung | (auto) | nein |
| WC | Damen-WC Vorraum | [[DIR-505|D-Link DIR-505]] | 192.168.0.94 | kein Web-Interface, W-LAN Client\\ Squeezebox-Client | (auto) | nein |
| Vodafone Andi | [[http://192.168.0.239|192.168.0.239]] | Vodafone Router |  | W-Lan Andi | (auto) Nein | nein |
| AP-Saal-2-3  | Lüftungskanal zwischen Saal 2-3    | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.240|192.168.0.240]] | Steuerung HDMI Matrix Switch | (auto) Nein | ja |
| AP-Bar   | Bar-Himmel | [[TL-WDR4300|TP-Link TL-WDR4300]] | [[http://192.168.0.241|192.168.0.241]] | -  | 1, 36 | OK |
| Saal 3 NO   | Östlicher Luftkanal Saal 3 | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.242|192.168.0.242]] | Steuerung HDMI Matrix Switch\\ I2C-Master über RJ11 | auto | nein |
| Saal   | Saal-Stiege 1. Stock (Audio-Rack) | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.244|192.168.0.244]] |
| Stadl   | Rack im Stadl/Carport | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.245|192.168.0.245]] | RS232-Schnittstelle | 13 |
| Bar-Rack   | Audio-Rack Bar | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.246|192.168.0.246]] | Audio-Streaming "streambar"\\ I2C-Schnittstelle | 8 | nein |
| Büro | Büro, beim Kopierer | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.247|192.168.0.247]] | |  3 | OK |
| AP-Seiler | Seilerstüberl, Luftschacht Ost, Blende links | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.248|192.168.0.248]] | Steuerung Benq Beamer über USB-RS232 |  13 | OK |
| AP-Kueche | Küche | [[WHR-G125|Buffalo WHR-G125]] | [[http://192.168.0.249|192.168.0.249]] | |  11 | Nein
| Saal-Mitte   |  Lüftungskanal Saal (zwischen PAR56-Scheinwerfer)     | [[TL-WDR4300|TP-Link TL-WDR4300]] | [[http://192.168.0.250/|192.168.0.250]] | |  6 |
| AP-Weinst   | Seilergasse 9, 2. Stock Ost | Linksys WRT54G/GS | [[http://192.168.0.251|192.168.0.251]] | |  6 |
| AP-Andi   | Seilergasse 9, 2. Stock Ost | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.252|192.168.0.252]] | AP-Client |  Auto |
| AP-F1   | Dachboden Freinersteig | [[TL-WR1043ND|TP-Link TL-WR1043ND]] | [[http://192.168.0.253|192.168.0.253]] | AP-Client |  Auto |
| Router-Dachboden   | Dachboden     | [[TL-WDR4300|TP-Link TL-WDR4300]] |  [[http://192.168.0.254|192.168.0.254]]  | |  8 | Nein |
===== 13-Kanäle (Patch) =====

  cd /tmp/
  wget http://smart-mt.at/downloads/reghack.elf
  chmod +x reghack.elf
  cp /lib/modules/*/ath.ko .
  cp /lib/modules/*/cfg80211.ko .
  ./reghack.elf ath.ko
  ./reghack.elf cfg80211.ko
  mv *.ko /lib/modules/*/
  reboot


===== Reverse SSH =====

Erstellen des Keys
  dropbearkey -t rsa -f /etc/id.key

[[http://www.brandonhutchinson.com/ssh_tunnelling.html]]

  # wget http://www.erwin.preuner.at/downloads/reversessh.sh -O /usr/bin/reversessh.sh
  # chmod 755 /usr/bin/reversessh.sh

Automatisch (neu) starten:
  cat <<EOF | sudo tee -a /etc/crontabs/root
  */10    *       *       *       *               /usr/bin/reversessh.sh 
  EOF
  
  cat <<EOF | sudo tee -a /etc/rc.local
  /usr/bin/reversessh.sh
  EOF

Konfiguration (/etc/reversessh.conf)
  REMOTE_PORT=5000

===== Kommunikation mit EIB =====
==== Buttons an LinKNX weiterleiten ====

**/etc/hotplug.d/button/buttons**
  #!/bin/sh
  logger button detected $BUTTON $ACTION
  
  if [ "$ACTION" = "pressed" ]; then
          VAL=1
  else
          VAL=0
  fi
  printf "<write><object id='`uname -n`-$BUTTON' value='$VAL' /></write>\4" | nc 192.168.0.1 22028
  logger "<write><object id='`uname -n`-$BUTTON' value='$VAL' /></write>\4"


==== TCP/UDP Signale an GPIO Weiterleiten ====
Achtung: Listen-Mode funktioniert nicht mit busybox-netcat. Daher mit "opkg install netcat" die vollständige Implementierung installieren.

  while [ 1 ]; do netcat -l -p 3002 > /sys/class/gpio/gpio29/value ; done